|
|
Biology
Dissection Instuments
HAND MICROTOME SIMPLE
1050-00
For introductory biology and histology work. Suitable for slicing micro
thin sections from 0.01mm (10 microns).
 |
Consists of a piston screwed into a tube whose free end is fixed into
a flat plate serving as a stage. The knurled head at the bottom of the
instrument moves the piston up or down the central tube when rotated.
The specimen is fixed on the flat top of the piston and sections are cut
by drawing a razor over the upper flat surface of the instrument. Equipped
with a clamping mechanism for objects of different shapes. Graduated in
10-micron (0.01mm) steps. Advances 500 microns (0.50mm) for each complete
turn. Supplied with a single edge tempered steel razor knife. Packed in
a velvet lined wooden case.
|
FORCEPS LARGE, BLUNT TIP
1065-00
For removing large objects from deep containers.
 |
With serrated sides and tips. Overall length 250mm. Made of stainless
steel.
|
HALSTEAD MOSQUITO FORCEPS
Helps in controlling leakage from vessels.
 |
This 5" long stainless steel instrument has a serrated box joint. Finger grips have 3-position latch for varying pressure. Blunt serrated tips.
|
| Type |
Straight |
Curved |
| Cat. No. |
1039-11 |
1039-50 |
TISSUE FORCEPS
To grasp and separate the skin and connective tissue on specimens
during dissection.
 |
A deep V groove on one jaw accommodates a tooth on the other
jaw (1 x 2 teeth). It is also called a rat-toothed forcep because of this
unique design. With serrated sides. Made of stainless steel.
|
| Size |
115mm |
150mm |
| Cat. No. |
1063-01 |
1063-02 |
FORCEPS, FINE TIP, CURVED
For precise dissection work.
 |
Made of stainless steel. With serrated tips, corrugated sides.
|
| Length |
115mm |
125mm |
| Cat. No. |
1061-01 |
1061-02 |
FORCEPS, FINE TIP, STRAIGHT
For more accurate dissection work.
 |
Made of stainless steel. With serrated tips, corrugated sides.
|
| Length |
115mm |
125mm |
140mm |
150mm |
| Cat. No. |
1059-01 |
1059-02 |
1059-02A |
1059-03 |
FORCEPS, BLUNT TIP, CURVED
1057-01
 |
With serrated sides and tips. Made of stainless steel. Length 125mm
|
FORCEPS, BLUNT TIP, STRAIGHT (THUMB FORCEPS)
For handling specimens.
 |
Made of stainless steel. Serrated and rounded tips for better grip. Corrugated
sides.
|
| Length |
115mm |
125mm |
140mm |
150mm |
| Cat. No. |
1055-01 |
1055-02 |
1055-03 |
1055-04 |
SCISSORS, DISSECTING, IRIS, STRAIGHT
For fine dissection work.
 |
Made of stainless steel with two sharp point blades.
|
| Overall length |
115mm |
125mm |
| Cat. No |
1072-01 |
1072-02 |
SCISSORS, DISSECTING, IRIS, CURVED
1073-00
Ideal for fine dissection work.
 |
Made of stainless steel with sharp and curved tips. Length 115mm.
|
ANGULAR IRIS SCISSORS
1039-45
|
For general purpose dissection
Made of stainless steel. Length 4.5". Has closed shanks and angled points.
Fine Point.
|
SCISSORS, DISSECTING, STRAIGHT
1070-01
For quickly cutting connective tissue and muscle.
 |
Made of stainless steel. One blunt and one sharp blade end. Length 125mm.
|
SCALPEL HANDLES (SURGICAL HANDLES)
1077-01
Detachable flat form in two sizes. Used with replaceable scalpel blades.
 |
Made of stainless steel. Without blades. Slip lock design.
Handle No. 3: For finer dissections. Used with #10, 11, 12 and 15 scalpel
blades. Length 130mm.
|
1077-02
 |
Handle No. 4: For heavier dissections. Used with #20, 21, 22 and 23 scalpel
blades. Length 130mm.
|
BONE SHEARS (BONE CUTTING FORCEPS)
Made of stainless steel.
 |
For speeding dissection work by cutting cartilage, chitin, bones, skull
etc.
|
| Length |
125mm |
175mm |
| Cat. No. |
1074-01 |
1074-02 |
SCALPEL, FIXED HANDLE
1076-01
For general dissection work.
 |
Integral handle. Made of forged stainless steel with a honed cutting blade.
Handle is ground and satin finished. Overall length 150mm, cutting edge
is 38mm long.
|

SCALPEL BLADES
For standard scalpel handles No. 3 and No. 4.
Made of surgical steel, sterile and individually packed in aluminum foil.
Differ in size and curvature. Pack of 10 blades.
| No. |
Cat. No. |
| 10 |
1078-01 |
| 11 |
1078-02 |
| 12 |
1078-03 |
| 15 |
1078-04 |
| 20 |
1078-05 |
| 21 |
1078-06 |
| 22 |
1078-07 |
| 23 |
1078-08 |
SCALPEL HANDLE WITH LOCK, STAINLESS STEEL
- Cat. No. 1077-05
- Special screw-lock mechanism lets you change blade size or shape instantly. Blade changing is as safe and easy as releasing a screw.
- The handle is fluted for a better grip.
- Supplied with No. 22 blade.
TEASING NEEDLES
For student dissection work.
 |
With wooden handle. Overall length approximately 130mm. Sharp points.
Pack of 100.
|
|
Straight |
Bent |
| Cat. No |
1080-01 |
1080-02 |
TEASING NEEDLES, WITH HANDLE
For greater strength and easy cleaning in dissection work.
 |
Finely pointed with hexagonal handle. One-piece construction of stainless
steel. Overall length 130mm. |
|
Straight |
Bent |
| Cat. No. |
1081-01 |
1081-02 |
PROBE & SEEKER, MALL
1083-01
An essential dissection instrument.
 |
An angular and blunt (tapered) probe with hexagonal handle. One-piece
construction of stainless steel. Overall length 130mm.
|
DROPPING PIPET (MEDICINE DROPPER)
1085-01
 |
Straight tip. Eye dropper. With a rubber bulb of capacity
2mL. Overall length 100mm. Made of neutral glass.
|
DISSECTION SET, BASIC
1090-00
 |
For performing complete dissection by students.
Made of stainless steel and consists of the following instruments in a
folding PVC pouch.
Ruler, plastic, 15cm
Scissors, surgical, with one blunt and one sharp point 125mm
Scissors, iris, sharp points, 110mm
Forceps, blunt tip 125mm
Forceps, microdissection, straight, 115mm
Teasing needle, pointed, 130mm
Teasing needle, with plastic handle, 130mm
|
DISSECTION SET, EIGHT ITEMS, ECONOMY
1090-01
Suitable for junior and senior level biology and life science students.
 |
A single-fold, lined, vinyl case is fitted with eight items:
Dropping pipet, glass
Forceps, stainless steel with sharp points,115mm
Scalpel, stainless steel, 150 mm (6") with screw lock
One pack of 10 No. 21 sterilized scalpel blades
Scissors, stainless steel, dissecting, 115mm
Two teasing needles, one straight and one curved, 130mm each, Wooden handle-provides better grip and allows sterilization
Ruler, plastic, 15cm
Substitution of one or more items is possible. Please call.
|
DISSECTION SET
1095-00
Designed for work in general biology.
Made of stainless steel and consists of the following instruments in a
folding PVC pouch.
Ruler, plastic, 15cm
Scissors, surgical, with one blunt and one sharp point 125mm
Scissors, iris, sharp points, 110mm
Forceps, blunt tip, 125mm
Forceps, microdissection, curved, 115mm
Scalpel handle No. 4
Teasing needles, pointed, 130mm, two
DISSECTION SET, ADVANCED
1105-00
For more advanced dissections with broad selection of needles and forceps.
 |
Made of stainless steel and consists of the following instruments in a
folding PVC pouch.
Ruler plastic, 15cm
Forceps, sharp points, 115mm
Forceps, sharp points, curved, 115mm
Forceps, blunt tips, 125mm
Scissors, surgical, with one blunt and one sharp blade
Scissors, iris, 110mm
Scalpel handle No. 4
Scalpel blade No. 22, Pk of 10
Scalpel blade No. 23, Pk of 10
Probe and hook, 130mm
Teasing needles, pointed,130mm, two
|
SUN DIAL
1201-00
For determining time of the day observing suns shadow by placing
on a windowsill.
 |
Made of cast alloy disc, approximately 110mm diameter with arabic numerals
and a gnomon. Instruction booklet is included.
|
ROOM THERMOMETER, METAL BACK
CELSIUS/FAHRENHEIT
1202-01
For classroom or outdoor use.
 |
Spirit-filled glass thermometer mounted on a rust-proof aluminum plate
with dual scale -20½ to 230½F x 1½F
and -30½ to 110½C x 1½C division. Approximately
(l x w),165 x 25mm. Pack of five.
|
DISSECTION SET, GENERAL PURPOSE
1110-00
General purpose dissecting set suitable for students and instructors.
 |
Includes the following
Ruler plastic, 15cm
Forceps, straight sharp points, 115mm
Forceps, thumb, 125mm
Scissors, dissecting, 125mm
Surgical handle, No. 3
Scalpel blade, No. 22, Pk of 10
Probe and hook, 130mm
|
DISSECTING CASE, VINYL, SINGLE- FOLD
1040-15
For assembling your own dissecting sets.
Made from grained vinyl with lining inside. Has six loops and button fastner.
DISSECTING CASE, VELVET LINED
1040-20
This attractive but inexpensive case has a zipper closure to protect
dissection instruments. Has 6 elastic loops for various sizes of
instruments. Measures 7" x 3 ¾" x 7/8" when closed.
INSECT PINS, (PINS ENTOMOLOGICAL)
For mounting insects in specimen cases. Sizes 2, 3, & 4 are used
for most insects, sizes 5 & 6 for heavy-bodied insects and sizes 00,
0 & 1 for small insects.
Made of black tempered steel with anti-rust coating & nylon heads.
Sharp & stiff. Length about 38mm (1.5in). Genuine Bohemian. Packets
of about 100. Available in eight different sizes. No. 00 is the finest
grade.
 |
Size |
Cat. No. |
| 00 |
1151-01 |
| 0 |
1151-02 |
| 1 |
1151-03 |
| 2 |
1151-04 |
| 3 |
1151-05 |
| 4 |
1151-06 |
| 5 |
1151-07 |
| 6 |
1151-08 |
DISSECTING PAN (DISSECTING TRAY), METAL
 |
- Various sizes of dissecting trays
- Comes layered with white wax
|
| Cat. No. |
Description |
| 1185-57A |
11.5” x 7.5” x 2” |
| 1185-57B |
12” x 10” x 2” |
| 1185-57C |
12.75” x 9.25” x 2” |
| 1185-57D |
16” x 12.75” x 2” |
Back to Top |