Quote
UniScience Laboratories Home Terms Order Info Contact Us

Search Product
Tongs and Test Tube Holders
Racks and Rings
Support Stands
Clamps and Burners
Brushes, Spoons and Splints
Spatulas, Watch Glassess and Borers
Plasticware and Guaze
 
 
 
 
 

Laboratoryware

Clamps & Burners

CLAMP EXTENSION, FOUR-PRONG

2062-01

Clamps

For providing a firm grip on objects of diameter from 2mm to 90mm.
Four pronged clamp of cast alloy with brass thumbscrew and cork lined jaws. Overall length approximately 240mm.


Request Quote

 

CLAMP, EXTENSION, RUBBER COVERED JAWS

2062-02

Clamps

For ensuring a firm grip on small round or irregularly shaped objects.
Three pronged aluminum die-cast clamp with brass thumbscrew. Jaws are covered with replaceable rubber tube, which open from 3-90mm. Overall length approximately 250mm.


Request Quote

 

CLAMP HOLDER, RIGHT ANGLE

2063-01

Clamps

For connecting two rods at right angles forming L or T shape.
Made of die-cast alloy with plated brass thumbscrews. It can accept or be clamped to rods up to 18mm diameter.


Request Quote

 

ALCOHOL BURNER (LAMP), GLASS

2066-01

Clamps

Suitable for student use.
Made of molded soda glass with tightly fitting sealed brass cap. Alcohol is poured by removing threaded brass wick holder. Equipped with a glass cap for extinguishing the flame and to prevent evaporation of alcohol. Capacity about 125mL.


Request Quote

 

BUNSEN BURNER FOR PROPANE GAS, SIMPLE

2066-02

Clamps

A heavy base with brass mixing pipe 13mm diameter and a 9mm diameter serrated gas inlet tube.


Request Quote

 

BURNER, TECLU, FOR PROPANE GAS

2066-03

Clamps

For obtaining a very hot flame, suitable for glass work and soldering.
Consists of a plated brass tube (h x o.d.), 105 x 13mm with threaded disc valve for adjustment of the air/gas mixture. Conical mixing section. Base diameter about 80mm and overall height 120mm. Serrated inlet tube diameter 9mm. Suitable for propane gas.


Request Quote

 

BUNSEN BURNERS

2066-22
Commonly used in laboratories that produce a single open gas flame, which is used for heating, sterilization and combustion.
BUNSEN BURNERS
  • Made of nickel-plated die-cast zinc alloy and with flame stabilizer
  • Serrated gas inlet connection
  • Overall height 6-1/8 (156mm)
  • For Natural gas
  • Aluminum mixing tube OD (13mm)
  • BTU Output 800-1200
  • Made in USA

Request Quote

 

BURNER TIRRILL, NATURAL GAS

2066-89
BURNER TIRRILL, NATURAL GAS
  • Noiseless burners provide a clear flame of any desired height with separate control of both flame temperature and flame height
  • Threaded aluminum air control sleeve and precision-machined
  • Fine-pitch brass needle valve with internal stuffing box and self-sealing packing
  • Rustproof 3-1/2 octagon-shaped, nickel plated, die-cast base and aluminum mixing tube
  • Overall height: 16.5 cm (6-1/2)
  • Mixing Tube OD: (13 mm)
  • Inlet OD: 7/16 (11 mm)
  • BTU Output: 800-1200
  • Made in USA

Request Quote

 

BUNSEN BURNER LP CYLINDER GAS

2066-99
BUNSEN BURNER  LP CYLINDER GAS
  • Flame Stabilizer
  • Air regulator and orifice
  • Base is die-cast zinc alloy, nickel-plated
  • Aluminum mixing tube, serrated gas inlet connections
  • 2000-3000 BTU per cubic foot
  • Height: 156 mm
  • Made in USA

Request Quote

 

WICKLESS METAL ALCOHOL LAMP

2067-95

WICKLESS METAL ALCOHOL LAMP
  • All-metal alcohol lamp has a single wickless burner
  • 100ml capacity
  • Includes metal snuffer cap for extinguishing flame and to prevent odor and evaporation when not in use
  • Individually boxed
  • Alcohol not included

Request Quote

 

BURNER WING TOPS

Clamps

For obtaining broad, fishtail flame that heats large area and smoothly bends glass. Also useful for flame tests and paint stripping.
Made of brass. Fits over a range of burner mixing tubes.

Outer diameter Cat. No.
mm (in)
11 (7/16) 2067-01
Request Quote
13 (1/2) 2067-02
Request Quote
16 (5/8) 2067-03
Request Quote
18 (11/16) 2067-04
Request Quote

 

DOUBLE BURETTE CLAMPS

2065-12

Double Burette Clamps
  • Can accommodate two burettes at both ends
  • Holds gently without blocking markings on burettes
  • Strong, durable construction
  • Jaws covered with plastic and rubber tubing

Request Quote

 

BURET CLAMPS


BURET CLAMPS
  • The V-shaped, plastic-coated jaws will gently hold a buret and lock at any angle. The round jaws will gently hold a buret and lock at any angle. Single jaw opens approximately 3/8 to 1 3/4, rotatable 360. Overall length approx. 61/2.
Cat. No.
2065-00 Plain Jaw
Request Quote
2065-55 Plastic Coated Jaw
Request Quote

 

Back to Top


UniScience Laboratories
Serving U.S., Canadian & Export Markets
Scientific Equipment & Supplies for Science, Education, Research & Industry

94 Trottier Bay
Fort Garry Ind. Park, Winnipeg, MB, R3T 3Y5, Canada
Tel: 204-269-9644 Fax: 204-269-0674 Toll Free: 877-406-9773
Web site:
www.unisciencelab.com Email: sales@unisciencelab.com